Sodium hexametaphosphate, commonly abbreviated SHMP, is a condensed sodium phosphate used in industrial processing and in certain regulated food applications. The name alone does not identify a commercial grade, phosphorus basis, chain-length distribution or permitted end use. Buyers should connect chemical identity, analytical limits, intended function, applicable regulations and batch documentation before comparing suppliers or quotations.
For Rriver Chemical product information, visit the Sodium Hexametaphosphate (SHMP) product page.
SHMP identity and naming
PubChem lists sodium hexametaphosphate under CAS 10124-56-8 and records SHMP, hexasodium metaphosphate and metaphosphoric acid hexasodium salt among the names. It presents the idealized formula Na6O18P6. These identifiers help confirm the intended substance but do not constitute a Rriver Chemical specification or describe every commercial condensed-phosphate distribution. Source: PubChem, Sodium Hexametaphosphate.
Commercial documents may also use sodium polyphosphate terminology or report phosphorus content on a P2O5 basis. The buyer should define the accepted name, CAS number, calculation basis and test method so that results from different suppliers are comparable.
Industrial functions and application qualification
Water treatment and sequestration
Condensed phosphates can be considered for sequestration, dispersion and water-conditioning functions. Actual performance depends on water chemistry, hardness ions, pH, temperature, residence time and dosage. A laboratory jar test or process trial should use representative water and operating conditions; a general SHMP assay cannot guarantee scale control or finished-water performance.
Detergent and cleaning formulations
In a detergent or industrial cleaner, SHMP may influence water hardness management, soil dispersion and formulation stability. The complete formula—including surfactants, alkalinity, builders and enzymes—must be evaluated for compatibility and storage behavior. Formulators should also assess phosphorus discharge requirements and wastewater treatment for the destination and use site.
Ceramics, minerals and other dispersions
Where SHMP is evaluated as a dispersant or processing aid in mineral, pigment or ceramic systems, particle surface, solids loading, pH and shear conditions affect results. The process owner should define measurable outcomes such as viscosity, settling, filtration or dispersion stability and then qualify the grade under those conditions.
Industrial grade versus food-use material
The U.S. FDA Food Substances inventory lists sodium hexametaphosphate, CAS 10124-56-8, and points to specified regulatory provisions and technical effects. That listing does not mean every industrial SHMP product is suitable for food use, nor does it authorize every use or level. Buyers must consult the cited regulation, current good manufacturing practice and any market-specific standards for the exact application. Source: U.S. FDA, Sodium Hexametaphosphate Food Substance Record.
A food-use inquiry should request the controlled food-grade specification, applicable compendial or legal references, impurity limits, allergen or origin statements where relevant and documentation from the actual manufacturer. A general industrial COA or product photograph cannot establish food compliance. Feed, drinking-water and food-processing uses may follow different rules and must be reviewed separately.
Building a practical SHMP specification
Begin with the intended function and grade. Depending on the application, a specification may address total phosphate or P2O5, inactive phosphate, pH, solubility, moisture or loss on drying, particle size, iron and other controlled impurities. The buyer should define units, sample preparation and methods rather than copying values from an old webpage.
- Identity: require Sodium Hexametaphosphate, SHMP and the agreed CAS reference.
- Grade and use: identify industrial or regulated use and the applicable standard.
- Phosphate basis: state whether results are reported as compound, phosphorus or P2O5.
- Physical form: define powder, granule, particle-size or dissolution expectations where critical.
- Traceability: reconcile the COA batch, package label and shipping documents.
For sample approval, record the supplier, grade, lot and analytical method. Performance testing should be tied to the evaluated process, and later production batches should remain subject to agreed incoming controls and change notification.
Packaging, storage and quotation checks

The archive image does not prove current inventory, package availability or conformity. Ask for bag construction, liner, net weight, palletization, moisture protection and label format. The receiving facility should review storage humidity, contamination control, dust handling and unloading arrangements using the current SDS and supplier instructions.
A quotation comparison should include grade, analytical basis, quantity, packaging, Incoterm, destination, freight basis, validity and available SDS, TDS and COA documents. A lower price is not comparable if phosphorus basis, impurity limits or regulatory status differ.
Frequently asked questions
Does a 68% label define the complete SHMP specification?
No. The basis of the percentage, analytical method, other chemical limits, physical form and intended grade must also be defined.
Can industrial SHMP automatically be used in food?
No. Food use requires a suitable grade and compliance with the applicable regulation, conditions of use, impurity limits and supplier documentation.
What should an SHMP inquiry include?
State the intended function, target market, specification and methods, quantity, particle requirements, packaging, destination, sample need and requested SDS, TDS and COA.
Request SHMP documentation
Explore Rriver Chemical’s Food & Feed Ingredients range, or contact Rriver Chemical to request available Sodium Hexametaphosphate documentation and a quotation. Final suitability, safe use and regulatory compliance must be confirmed for the specific formulation and destination.
References checked on September 13, 2026. This article provides general procurement information and does not replace the current SDS, supplier specification, application testing or professional food and regulatory advice.

