Methacrylamidopropyl trimethyl ammonium chloride (MAPTAC) is a quaternary ammonium methacrylamide monomer used to build water-soluble cationic polymers. It should be purchased as a defined monomer solution, not as a generic “cationic chemical.” Concentration, stabilizer, impurities and polymerization performance all require agreement before a source is approved.
For Rriver Chemical supply information, see the Methacrylamidopropyl Trimethyl Ammonium Chloride product page.
Verify MAPTAC identity
PubChem identifies methacrylamidopropyltrimethylammonium chloride by CAS 51410-72-1, formula C10H21ClN2O and the abbreviation MAPTAC. ECHA associates it with EC number 257-182-1. The identity should be written in full at least once on the purchase specification because MAPTAC can be confused with other quaternized methacrylate or methacrylamide monomers. Source: PubChem, MAPTAC; Source: ECHA dossier evaluation status.
A CAS number does not establish solution concentration, stabilizer level, color, pH or suitability for a particular polymer. The quotation, COA, SDS, label and shipment must all refer to the same commercial grade.
Why formulators select MAPTAC
A cationic polymer building block
Evonik describes MAPTAC as a quaternized aminofunctional monomer used to prepare water-soluble cationic polymers. It can be homopolymerized or copolymerized to introduce permanent cationic functionality. The resulting polymer’s charge density, molecular weight and architecture depend on the complete monomer recipe and process—not on MAPTAC alone. Source: Evonik VISIOMER MAPTAC.
Hydrolytic stability and polymer design
Evonik’s technical information distinguishes MAPTAC as a methacrylamide and notes increased hydrolytic stability compared with methacrylic esters. That comparison concerns the supplier’s product and chemistry; it should not be turned into a universal shelf-life or application guarantee. The polymer formulator must validate conversion, stability and final performance under its own conditions. Source: Evonik, Amino Methacrylates technical information.
Retention and dewatering applications
Evonik notes that copolymers of acrylamide and quaternized monomers such as MAPTAC can act as retention and dewatering agents. In papermaking, the result depends on polymer composition, molecular weight, furnish, charge demand, conductivity, pH, dose and addition point. A MAPTAC monomer COA cannot predict mill performance without polymer and application trials.
Building a MAPTAC specification
A commercial MAPTAC solution can be characterized by active substance, chloride content, pH, color and stabilizer. Evonik publishes a 50% aqueous grade with defined controls, but those figures are an example from that manufacturer and must not be assumed for Rriver Chemical or another supplier. Request the actual current specification for the offered grade.
- Identity: require MAPTAC, CAS 51410-72-1 and the agreed product grade.
- Active substance: define concentration, basis, tolerance and analytical method.
- Stabilization: identify inhibitor or stabilizer type, range and test method where required.
- Process quality: agree chloride, pH, color and relevant impurity controls.
- Traceability: match manufacturer, factory, batch number, COA, label and shipment documents.
For polymer production, buyers may also need data on residual starting materials, density and viscosity under stated conditions. Every limit should have units, a test method and a reporting basis. “High purity” without those details is not an acceptance criterion.
Supplier qualification and change control
Qualify the actual manufacturing site rather than only the trading company. Review batch consistency, raw-material control, retained samples, complaint handling and notification of changes to the production route, stabilizer, specification or site. Ask an exporter or supplier how original factory documents remain traceable through the supply chain.
A source-change trial should use the intended polymer recipe and reactor conditions. Compare monomer conversion, residuals, viscosity, charge density, gels, color, filtration behavior and the finished polymer’s end-use performance. A small lab trial should precede plant scale-up.
Handling, storage and packaging

The photograph does not prove current stock, concentration or package availability. Follow the supplier’s current SDS and storage statement for the exact grade. Define drum, IBC or bulk packaging, seal, palletization, label fields, temperature limits and shelf life in the purchase documents.
MAPTAC is a polymerizable monomer solution. Storage conditions, contamination and inhibitor control can affect stability, while freezing or excessive heat may create handling problems depending on the grade. The receiving site should use compatible equipment and approved transfer, sampling and spill-response procedures.
Price and quotation comparison
Compare MAPTAC price on the same active-content and stabilizer basis, impurity limits, quantity, package, Incoterm, destination and freight basis. A manufacturer, factory, exporter or supplier should state quotation validity, lead time and document scope. Normalize cost per kilogram of active monomer and consider polymer yield, filtration and quality-control costs.
Frequently asked questions
Is MAPTAC the same as a finished cationic polymer?
No. MAPTAC is a monomer used to make polymers. The final polymer has its own composition, molecular weight, properties and application specification.
Does CAS 51410-72-1 prove a 50% solution?
No. The CAS number identifies MAPTAC; solution concentration and stabilizer must be confirmed for the commercial grade.
What belongs in a MAPTAC inquiry?
State the required active content, polymer application, stabilizer and impurity requirements, quantity, package, destination, Incoterm and requested specification, COA and SDS.
Request MAPTAC documentation
Explore Rriver Chemical’s Paper Making Chemicals, or contact Rriver Chemical to request available MAPTAC documentation and a quotation. Final polymerization suitability, handling and compliance must be confirmed for the exact grade and batch.
References checked on September 17, 2026. This article provides general procurement information and does not replace the current supplier specification, SDS, polymerization study or professional regulatory advice.

