Evaluating a paper dry strength agent requires a controlled mill trial, not just a polymer name or a low price per kilogram. Fiber furnish, recycled-fiber quality, fines, filler, conductivity, pH, charge demand, refining, retention program, press performance and drying conditions can all change the response. A manufacturer, factory, exporter or supplier quotation should therefore be reviewed together with a trial protocol, product specification and cost-in-use calculation.
This checklist helps mills compare candidates without assuming that a dosage or result from another machine will transfer directly to their own process.
Define the mill objective first
Write down the primary objective before selecting a product. Examples include higher tensile, burst, internal bond, compression strength or initial wet-web strength; lower basis weight; more recycled fiber; reduced refining energy; or improved machine productivity. Choose a small set of primary and guardrail metrics so the trial does not chase every possible change at once.
Establish a stable baseline
Collect enough baseline data to represent normal variation. Record grade, furnish, basis weight, ash, moisture, machine speed, refining, wet-end chemistry, broke, retention, drainage, press solids, steam and laboratory strength results. A short “before” period during an unstable upset cannot provide a fair control.
Confirm the offered product identity
“Dry strength agent” is a functional description, not one chemical identity. Commercial programs can include cationic, anionic or amphoteric polyacrylamides, glyoxylated products, polyamines, starch-based systems, enzymes or combinations. Solenis describes multiple chemistry families in its dry-strength portfolio, illustrating why the exact grade and application conditions must be confirmed. Source: Solenis, Hercobond dry strength additives.
Ask for product name, chemistry description, ionic character, active solids, viscosity basis, pH, density, storage limits, shelf life and manufacturing site. Do not infer molecular weight, charge density or composition solely from a CAS number or generic sales name.
Screen compatibility before the machine trial
Use laboratory work and supplier technical support to examine the candidate in actual process water and furnish. Test realistic conductivity, pH, temperature, hardness, dissolved and colloidal substances, filler and existing additives. Watch for precipitation, flocculation, excessive viscosity, foam or loss of performance.
Map the addition point
Document dilution water quality, make-down concentration, agitation, pump range, line length, contact time and addition location. Sequence relative to alum, starch, sizing agents, fixatives, retention polymers and fillers can matter. A candidate should not be approved until the mill can feed it consistently and safely.
Design a stepwise dosage trial
Use a written protocol with baseline, introduction, controlled dosage steps and, where practical, a return to baseline. Allow the wet end and reel to reach a defined steady state before sampling. Change one important variable at a time. Record the actual product flow and calculate dosage on the agreed basis, such as product as supplied or active solids per dry ton.
Dry-strength suppliers publish case histories with mill-specific gains, but those results are not universal specifications. For example, a Solenis case describes a recycled containerboard program evaluated against ring crush, mullen, internal bond, basis weight and productivity. It is useful as an example of measured endpoints, not a guarantee for another mill. Source: Solenis, packaging mill dry-strength case history.
Measure strength and process guardrails
Select test methods before the trial and keep sampling, conditioning and testing consistent. Depending on the grade, evaluate tensile index, burst index, SCT or ring crush, internal bond, stiffness, tear, wet-web behavior and converting performance. Track formation, retention, drainage, vacuum, press solids, sheet moisture, steam, breaks, deposits, felt condition and effluent effects as guardrails.
- Quality: strength must improve without unacceptable formation, softness, absorbency or surface change.
- Runnability: monitor drainage, pressing, drying, deposits and breaks.
- Consistency: compare multiple reels and repeat conditions where practical.
- Economics: use cost per saleable ton, not chemical price alone.
Analyze data against production variation
Separate product response from simultaneous changes in furnish, basis weight, ash, speed or refining. Normalize strength results where appropriate and retain the raw values. Use enough observations to understand normal scatter, and have mill personnel approve the comparison method before seeing the final result.
Check downstream performance
Laboratory strength at the reel is not the only outcome. Review slitting, winding, printing, coating, corrugating, converting and customer complaints where relevant. An apparent machine benefit may be offset by dusting, brittleness, curl, bond failure or another downstream issue.
Inspect the product and batch documents
Require a current TDS and SDS plus a batch COA defining product, grade, batch, dates, specification revision, methods, limits, results, units and release authorization. Confirm active-solids basis and any controlled viscosity, pH or charge-related parameter. Ask how changes to raw materials, manufacturing site, process, test method and packaging are communicated.

Calculate cost in use
Include delivered product cost, active-solids basis, make-down and feed equipment, labor, energy, cleaning, storage, freight and waste. Credit only benefits demonstrated in the controlled trial, such as fiber savings, lower basis weight, reduced refining, higher speed or fewer breaks. Use a conservative operating window rather than the single best reel.
Trial approval checklist
- Primary objective and guardrail metrics are agreed.
- Baseline variation is documented.
- Product identity, active basis and storage requirements are verified.
- Compatibility and feed-system capability are checked.
- Dosage steps, steady-state time and sampling are written.
- Strength, runnability and downstream results are reviewed together.
- Cost per saleable ton is calculated.
- Supplier documents and change control are approved.
Request dry strength agent documentation
Review River Chem’s Dry Strength Agent page and the broader Paper Making Chemicals range. To request available specifications, SDS, sample options, price and a quotation, contact Rriver Chemical with the paper grade, furnish, process conditions, target metrics, trial quantity and destination.

