Home     /     Blog     /     SDIC vs TCCA: Comparing Product Forms and Water-Treatment Requirements
By Coco

Sodium dichloroisocyanurate (SDIC or NaDCC) and trichloroisocyanuric acid (TCCA) are chlorinated isocyanurates used to deliver available chlorine, but they are different chemical identities. They differ in sodium content, molecular form, available-chlorine basis, dissolution behavior and commercial forms. Water-treatment buyers must match the product, formulation and dose-control system to the approved use and operating conditions.

Rriver Chemical provides verified pages for Sodium Dichloroisocyanurate (SDIC) and Trichloroisocyanuric Acid (TCCA) in the Water Treatment Chemicals category.

Confirm SDIC and TCCA identity

PubChem identifies anhydrous sodium dichloroisocyanurate as sodium dichlorocyanuric acid, CAS 2893-78-9. A separate dihydrate form is CAS 51580-86-0 and includes two waters of hydration. The distinction changes molecular weight and the basis of an assay or available-chlorine statement. Source: PubChem, sodium dichloroisocyanurate. Source: PubChem, sodium dichloroisocyanurate dihydrate.

PubChem identifies TCCA as CAS 87-90-1, molecular formula C3Cl3N3O3 and molecular weight 232.41 g/mol. It is also called trichloro-s-triazinetrione or symclosene. Source: PubChem, trichloroisocyanuric acid.

Anhydrous and dihydrate SDIC are not the same basis

A quotation that says only “SDIC” may be incomplete. Ask whether the offered material is anhydrous or dihydrate, require the CAS number and confirm how available chlorine and assay are calculated.

Product form affects feeding and dissolution

SDIC is commonly offered as granules, powder or tablets, while TCCA is also sold in powders, granules and compressed tablets of different sizes. The exact commercial form influences dissolution rate, dust, feeder compatibility, storage density and operator handling.

Tablets are engineered products

Tablet weight alone does not define performance. Compression, dimensions, dissolution additives and other formulation components can influence delivery. The buyer should request the product formulation, intended feeder type and use directions for the exact tablet.

Granules and powders require dust control

Smaller particles may dissolve faster but can create more dust and segregation risk. Define particle-size expectations, dust-control practices and compatible dosing equipment during qualification.

Available chlorine must be compared correctly

SDIC and TCCA can have different theoretical and commercial available-chlorine values, and SDIC hydrate status affects the basis. Never compare a percentage without confirming the test method, active identity, moisture or hydration basis and whether the number is a guaranteed minimum or a typical value.

Plant dosing should be based on a validated control plan and measured water quality, not a simple percentage copied from a sales page. Demand, pH, contact time, temperature, organic load and hydraulic conditions influence the residual achieved.

Water-treatment requirements define selection

For swimming pools, industrial systems, emergency treatment or other applications, the product must be legally permitted and labelled for the intended use in the destination market. Registration and use directions can vary by formulation and jurisdiction.

WHO’s current sodium dichloroisocyanurate fact sheet states that product used for drinking-water disinfection should be of adequate purity so that it does not increase inorganic or organic contaminants. It also emphasizes control of free chlorine. This does not authorize an unregistered product or replace local requirements. Source: WHO chemical fact sheet, sodium dichloroisocyanurate.

Compare specifications beyond the headline percentage

  • Identity: full name, CAS number and hydrate status.
  • Available chlorine: method, basis and guaranteed minimum.
  • Moisture: test method and limit appropriate to the form.
  • pH: defined solution concentration and method.
  • Particle or tablet form: dimensions, weight and dissolution criteria.
  • Impurities: agreed controls linked to the application and regulation.
  • Documentation: current SDS, specification, representative COA and approved label where required.

Do not treat an SDIC specification as a template for TCCA. Each chemical and formulation needs its own methods, limits and qualification record.

Compatibility and safety require strict controls

Chlorinated isocyanurates are oxidizing materials and can react dangerously with incompatible substances. Never mix them with acids, ammonia, reducing agents, organic materials or other pool or treatment chemicals unless an approved procedure specifically requires and controls the operation. Contamination in a scoop, feeder or storage area can be hazardous.

Use the current SDS and label for the exact product. Qualified personnel should establish ventilation, dust control, PPE, fire response, spill handling, segregation and waste procedures. Water-treatment operators must also follow local requirements for dosing, monitoring and recordkeeping.

Packaging, storage and receiving

Archive collage of sodium dichloroisocyanurate packaging forms
Archive SDIC packaging collage showing several historical forms. It does not establish current inventory, available chlorine, formulation, package, label or specification.

Confirm the offered form, package material, net weight, closure, liner and pallet configuration. Store only under conditions stated in the current SDS and approved label, protected from moisture and incompatible chemicals. At receipt, verify the identity, CAS number, lot, seal, COA and label before release.

Manufacturer, factory and supplier qualification

Determine whether the seller is the manufacturer, factory, exporter, distributor or another supplier. Confirm the production and tableting site, formulation control, available-chlorine method, batch traceability, change notification, retained samples and complaint handling. Ask how cross-contamination between chlorine products is prevented.

Price and quotation comparison

Compare price only among products approved for the same use and normalized for active identity, hydrate form, available-chlorine basis, package, shipment quantity, Incoterm, destination and documentation. Tablets, granules and powders may have different manufacturing, freight and dosing costs.

Frequently asked questions

Are SDIC and TCCA interchangeable?

No. They are distinct chlorinated isocyanurates with different identities and formulation behavior. Any change requires regulatory review, feeder compatibility checks and dosing validation.

Is every SDIC suitable for drinking water?

No. Suitability depends on purity, formulation, product authorization, label directions and local regulations. Confirm all of these before use.

What should an inquiry include?

State SDIC or TCCA by full name and CAS number, hydrate and product form, intended water-treatment use, specification, package, quantity, destination and required regulatory documents.

Discuss a chlorinated-isocyanurate requirement

Review Rriver Chemical’s SDIC and TCCA pages, then contact Rriver Chemical with the exact identity, form, intended use, specification, quantity, package and destination to request available documentation and a quotation.

References checked on October 3, 2026. This guide provides general procurement information and does not replace an approved label, current SDS, supplier specification, treatment validation or professional safety and regulatory review.

  • Get Best Chemical

    Join Rriver Chemical Newsletter to get more information of chemical products, and all kinds of chemical products.

  • Subscribe to Our Blog

    We will never rent or sell your email to anyone.

  • Develop Your Chemical Business with Rriver Chemical

    Contact Us Now