PolyDADMAC, also written as PDADMAC or poly(diallyldimethylammonium chloride), is a permanently cationic water-soluble polymer. Commercial products are not defined by the name alone: active solids, viscosity, molecular-weight range, residual monomer and application controls can differ substantially between grades. A useful inquiry therefore starts with the process requirement rather than a copied specification.
For the currently listed Rriver Chemical material, see the PDADMAC product page.
Confirm PolyDADMAC identity first
Rriver Chemical lists PDADMAC with the repeating-unit formula (C8H16ClN)n and CAS 26062-79-3. PubChem records poly(diallyldimethylammonium chloride) as a polymer rather than a single discrete molecular structure. This matters because a CAS number can establish the polymer family but cannot specify chain length, distribution, solution concentration or performance. Source: PubChem, PolyDADMAC reference collection.
PolyDADMAC is not DADMAC monomer
DADMAC, CAS 7398-69-8, is the reactive monomer; PolyDADMAC is its polymer. The U.S. EPA describes DADMAC as the precursor to PolyDADMAC products used as coagulants and dewatering agents. Ordering the monomer when a ready-to-use polymer is required would create a fundamental specification error. Source: U.S. EPA, DADMAC Supply Chain Profile.
One CAS number can cover multiple commercial grades
Polymer molecular weight is a distribution, not one exact small-molecule value. Commercial solutions may also differ in solids, pH, viscosity and residual DADMAC. Every quotation, specification, COA, SDS and label should identify the same grade and reporting basis.
How grades and viscosity should be compared
Viscosity is often used as a practical grade-control parameter, but it is meaningful only when the test conditions are stated. Temperature, spindle, speed, instrument, sample concentration and method can change the result. A higher viscosity does not automatically mean a better product or a universally higher molecular weight.
Active solids and viscosity belong together
Compare viscosity at the same active-solids level and temperature. A concentrated grade can appear much more viscous than a diluted grade even if the underlying polymer architecture is similar. Ask whether solids are measured by an agreed oven, moisture or other method, and whether the COA result is reported as supplied.
Molecular weight and charge
PolyDADMAC carries quaternary ammonium groups and remains cationic across a broad pH range, but molecular weight still affects adsorption, bridging, mixing and drainage behavior. Charge density, molecular-weight range and viscosity should be selected together for the actual water, furnish or sludge. Supplier grade labels such as low, medium or high viscosity are not universal standards.
Industrial applications and their limits
The EPA identifies PolyDADMAC among the cationic polymers commonly used in drinking-water treatment. It also emphasizes that commercial treatment polymers can contain unreacted monomer, so residual-monomer control and permitted dosage deserve review. Drinking-water use must follow the applicable local approvals and plant procedures; an industrial COA alone is not evidence of approval. Source: U.S. EPA, support document on treatment polymers and residual monomers.
- Water and wastewater treatment: coagulation, charge neutralization, clarification and dewatering programs selected by jar or process trials.
- Pulp and paper: charge control, retention, drainage and contaminant-management programs, normally evaluated with the complete wet-end chemistry.
- Process industries: liquid-solid separation or deposit-control programs where a cationic polymer is compatible with the feed and downstream requirements.
Performance claims cannot be transferred between applications. Water chemistry, pH, conductivity, suspended solids, dissolved organics, shear, contact time and competing additives can change the optimum grade and dosage. In potable-water treatment, current certification and regulatory acceptance must be checked for the exact product and jurisdiction.
Trial design and supplier qualification
Begin with laboratory screening, then confirm the selected grade in a controlled plant trial. Record feed concentration, dilution water, mixing energy, addition point, contact time and downstream measurements. For clarification, this may include turbidity, settling and sludge handling. For paper, it may include charge demand, first-pass retention, drainage, deposits and finished-sheet tests.
Qualification should reconcile the manufacturer or factory name, production site, supplier and exporter. Review batch traceability, change notification, analytical methods, retained samples, complaint handling and the current specification, COA and SDS. If a supplier proposes a substitute grade, require a written comparison and repeat critical trials.

Storage, packaging and handling
Follow the current SDS and supplier storage instructions for the exact grade. The inquiry should define package type, net weight, seal, label fields, temperature range and destination. Before unloading, verify that tanks, pumps, meters, hoses and seals are compatible with a viscous cationic solution and that the site has approved transfer, sampling and spill procedures.
Avoid assuming that an archive package photograph represents the shipment offered today. Request current packing details and check the delivered label, batch number and COA before use. Freezing, excessive heat, contamination or long storage may affect handling or performance, so use documented limits rather than a generic shelf-life claim.
Price and quotation questions
Compare PolyDADMAC price on the same active-solids basis, grade, quantity, packaging, Incoterm and destination. Freight, dilution, pumpability and process dosage can matter more than the price per tonne of solution. A complete quotation should state grade, solids, viscosity test conditions, package, lead time, validity and the documents available for the offered batch.
Frequently asked questions
Does CAS 26062-79-3 define a PolyDADMAC grade?
No. It identifies the polymer family; solids, viscosity, molecular-weight distribution, residual monomer and application suitability require separate specification.
Can viscosity values from two suppliers be compared directly?
Only when concentration, temperature, instrument and method are comparable. Otherwise the numbers may describe different test conditions rather than a true grade difference.
Is a drinking-water application automatically approved?
No. Confirm the exact product’s current certification, residual controls, permitted dosage and local regulatory requirements.
Request PolyDADMAC documentation
Browse Rriver Chemical’s Paper Making Chemicals, or contact Rriver Chemical with the required application, active solids, viscosity range, quantity, package and destination to request available documentation and a quotation.
References checked on September 18, 2026. This article provides general procurement information and does not replace a current specification, SDS, application trial or professional regulatory review.

