Home     /     Blog     /     AKD Wax: Grades, Specifications and Paper-Sizing Applications
By Coco

Alkyl ketene dimer (AKD) wax is a reactive sizing raw material used to help paper and paperboard resist liquid-water penetration. Commercial names such as AKD 1840 and AKD 1865 can indicate differences in fatty-chain composition or supplier grade, but they are not a universal specification. Buyers should compare verified composition, assay, physical properties and mill performance rather than select a grade from its number alone.

For Rriver Chemical supply information, visit the AKD Wax 1840/1865 product page.

What AKD wax does in papermaking

Solenis identifies alkyl ketene dimer as an internal sizing chemistry used to improve aqueous holdout in printing paper and packaging board. Kemira likewise describes AKD products for fine paper, printing paper, packaging board and molded-fiber applications. These supplier portfolios show the broad function of AKD, but they do not prove that every wax grade performs the same way in every furnish. Source: Solenis, Sizing Agents; Source: Kemira, Internal Sizing.

Raw AKD wax is normally converted into a stabilized dispersion or emulsion before wet-end use. TAPPI research describes commercial sizing as a sequence that includes wax emulsification, control of particle agglomeration, retention on solids, spreading and curing during paper drying and cooling. This system perspective explains why a wax COA alone cannot guarantee Cobb, HST or machine performance. Source: TAPPI Journal, AKD sizing study.

Understanding AKD 1840 and AKD 1865

Grade numbers need a supplier definition

The Rriver Chemical listing associates 1840 and 1865 with C18 content. However, these numbers should be treated as commercial grade designations rather than an industry-wide analytical standard. A buyer should request the manufacturer’s written definition, the accepted test method and the range that applies to each grade.

Commercial AKD can be produced from different fatty-acid feeds and chain-length distributions. Patent literature describes common products based on palmitic and/or stearic acid and shows that composition influences physical behavior. It is safer to compare measured properties than to assume a grade number uniquely defines feedstock or melting behavior. Source: EP0742315B1, 2-oxetanone sizing agents.

Melting behavior and processing

Wax melting or solidification behavior affects storage, transfer, flaking, melting and emulsification. The specification should define the relevant method and acceptable range. A value from a different manufacturer’s brochure is not a valid substitute because fatty-chain distribution, residuals and the test method may differ.

Assay is not the whole performance story

Active AKD content, acid value, moisture or volatile matter, color and physical form may be useful purchasing controls. Yet dispersion particle size, stabilizer system, charge, furnish, retention aids, pH, conductivity, temperature and dryer conditions also influence sizing. Mills should connect raw-material tests to a controlled emulsion and paper trial.

Build a useful AKD wax specification

  • Grade identity: state AKD 1840 or AKD 1865 and require the supplier’s grade definition.
  • Composition: request the agreed C16/C18 or other chain-distribution information where relevant.
  • Chemical quality: define AKD assay, acid value, moisture or volatiles and test methods.
  • Physical properties: specify appearance, flake or pellet form, color and melting range as needed.
  • Traceability: match manufacturer, factory, batch number, COA, label and shipment records.

The specification should also define sampling and acceptance rules. If the wax will be emulsified by the buyer, ask for information relevant to the intended emulsifier, starch, mixing equipment and target solids. If a third party prepares the emulsion, qualify both the wax and the conversion process.

Mill trials and performance evaluation

Set the trial objective first

Choose the paper grade and target performance before dosing the product. Depending on the mill, measures may include Cobb, Hercules Size Test, contact angle, edgewick, print behavior, coefficient of friction, deposits, retention, drainage and machine runnability. The control and trial reels should use comparable furnish and operating conditions.

Watch the wet-end system

AKD efficiency depends on delivery to and retention on fiber and filler surfaces. Changes in recycled furnish, anionic trash, conductivity, pH, temperature, retention program or broke can shift results. Record these variables instead of attributing every performance change to a wax grade.

Confirm curing and conversion behavior

Some sizing response develops during drying, cooling or later storage. A test schedule should therefore state when samples are conditioned and measured. At the same time, over-application or poor distribution can create deposits, slip or converting issues. The approved operating window should come from mill trials.

Packaging, storage and handling

Archive product image showing pale AKD wax flakes in a clear display vessel
Archive AKD wax flake image for illustration. Confirm current grade, composition, package, net weight, label and batch documents for every order.

The image illustrates wax flakes but does not establish the current grade, C18 content, specification or inventory. Request the current SDS and supplier storage statement. Define bag or carton construction, liner, net weight, palletization, lot marking and protection from heat, moisture and contamination. Warehouse and melting procedures must account for the actual product’s physical properties.

Price and quotation comparison

Compare AKD wax price on the same grade definition, assay, melting specification, quantity, package, Incoterm, destination and freight basis. When assessing a manufacturer, factory, exporter or supplier, confirm whether testing, pallets, inspection and documents are included. A lower price per tonne may not be economical if the wax gives poor emulsion yield, unstable dispersion or inconsistent sizing.

Frequently asked questions

Is AKD 1865 always better than AKD 1840?

No. The grade numbers require the supplier’s definition, and suitability depends on wax properties, emulsification equipment and the mill’s paper grade and operating conditions.

Can raw AKD wax be added directly to paper furnish?

Commercial wet-end use generally relies on a controlled dispersion or emulsion. Follow the approved process and supplier guidance rather than adding flakes directly.

What should a quotation request include?

State the grade, supplier definition, application, key limits and methods, quantity, packaging, destination, Incoterm and requested specification, COA and SDS.

Request AKD wax documentation

Browse Rriver Chemical’s Paper Making Chemicals, or contact Rriver Chemical to request available AKD Wax documentation and a quotation. Final emulsion compatibility, mill performance and safe handling must be confirmed for the exact grade and batch.

References checked on September 16, 2026. This article provides general procurement information and does not replace the current supplier specification, safety data sheet, emulsion study or mill trial.

  • Get Best Chemical

    Join Rriver Chemical Newsletter to get more information of chemical products, and all kinds of chemical products.

  • Subscribe to Our Blog

    We will never rent or sell your email to anyone.

  • Develop Your Chemical Business with Rriver Chemical

    Contact Us Now