Cyclohexanone is an industrial ketone identified by CAS number 108-94-1. Buyers may encounter it under the abbreviation CYC or the trade name “anone,” but a purchase specification should always use the full chemical name and CAS number. The central purchasing question is not simply whether a material is called cyclohexanone; it is whether the offered grade, impurity profile and documentation fit the intended process.
For the associated listing, see Rriver Chemical’s Cyclohexanone (CYC) page.
Cyclohexanone identity and reference properties
The NIOSH Pocket Guide identifies cyclohexanone as C6H10O and describes it as a water-white to pale-yellow liquid with a peppermint- or acetone-like odor. Its reference data include a boiling point of 312°F, approximately 156°C, limited water solubility and a 111°F flash point. These values help confirm identity and inform a preliminary handling review, but they are not Rriver Chemical batch specifications. Source: NIOSH Pocket Guide, Cyclohexanone.
NIOSH classifies cyclohexanone as a combustible liquid and includes a skin notation in its exposure guidance. A current safety data sheet, site risk assessment and qualified occupational-safety review are therefore essential. An odor description is never a suitable receiving test, and this article does not provide handling instructions.
How formulators evaluate cyclohexanone as a solvent
In a coating or resin process, solvent selection affects more than initial viscosity. The technical team should evaluate the complete formulation, application method, substrate, drying profile and final-film requirements. A neat-solvent property table cannot predict performance after pigments, binders and additives are introduced.
Define the comparison before testing
Use a written laboratory protocol for candidate samples. Record the formulation version, sample batch, mixing sequence, temperature, application thickness and observation period. Useful checkpoints can include blend uniformity, application viscosity, surface appearance, drying behavior and any process-specific acceptance criteria. The exact tests should be chosen by the formulator, not copied from a generic supplier article.
Separate chemical identity from application approval
A material can meet an identity test and still be unsuitable for a particular process. Conversely, a short visual trial does not establish that every future batch is acceptable. Connect the approved sample to a supplier grade, batch number, analytical method and agreed specification so purchasing and quality teams can reproduce the decision.
Specifications worth defining in an inquiry
A useful request for quotation states which characteristics are contractual and how they will be tested. Avoid unqualified phrases such as “top grade” or “high purity.” Depending on the process, the technical team may need to review assay, water, color, acidity and relevant organic impurities. Rriver Chemical should only confirm parameters that appear in the current quotation and product documents.
- Identity: use Cyclohexanone, CAS 108-94-1, consistently on the quotation, SDS and batch certificate.
- Analytical limits: state the required limits and accepted test methods instead of comparing headline purity alone.
- Batch evidence: request a certificate of analysis that identifies the supplied lot and document revision.
- Application qualification: link the laboratory approval to the exact sample and formulation tested.
- Change control: agree how changes to grade, source or specification will be communicated.
Packaging, storage and delivery documentation

A generic drum photograph is not proof of current inventory, product identity or shipment compliance. Ask for the proposed package type, net quantity, closure, pallet arrangement and label information. The receiving facility should confirm its storage and unloading requirements before ordering. Dangerous-goods classification and route-specific transport requirements must be confirmed from the current SDS and by qualified logistics professionals.
Before release, reconcile the purchase order, product label, SDS, technical data sheet and certificate of analysis. The chemical name, CAS number, supplier grade and batch reference should agree. Resolve discrepancies before the material reaches production.
Frequently asked questions
Is CYC enough information for a purchase order?
No. Abbreviations can be misunderstood. Include the full name Cyclohexanone and CAS 108-94-1, plus the agreed grade and specification.
Does a higher assay guarantee better coating performance?
No. Performance depends on the complete impurity profile, formulation and process conditions. Use documented application trials together with analytical acceptance limits.
What should a supplier inquiry include?
Provide the intended industrial application, destination country, required specification, quantity, packaging preference and qualification documents. Ask for a representative sample if your approval process requires one.
Request Cyclohexanone documentation
Explore Rriver Chemical’s paint, coating, resin and ink chemical range, or contact Rriver Chemical to discuss available Cyclohexanone documentation. Suitability, safe use and regulatory requirements must be confirmed for the specific application and destination.
Reference checked on September 5, 2026. This article is general purchasing information and does not replace the current SDS, supplier specification, application testing or professional safety advice.

